Skip to main content
← Back to Guides
Speed & Driving Guide

Hammer Down and Other CB Speed Phrases Explained

Hammer down is probably the most famous CB radio phrase in trucking. But it is just one of dozens of speed-related terms you will hear on channel 19. This guide covers every CB phrase related to speed, driving pace, and acceleration — with real-world examples and the etiquette behind each one.

OT

O Trucking Editorial Team

Trucking Industry Experts

Published: February 20, 2026Updated: February 20, 2026

Fact-Checked by O Trucking Editorial Team

5+ Years Experience80+ Carriers ServedIndustry Data Verified

This article was written by the O Trucking editorial team with 9+ years of combined trucking industry experience. Learn more about us.

The Complete Speed Phrase Dictionary

Here is every CB phrase related to speed, organized by category. These are real terms used by real truckers on channel 19 every day across the country:

“Go Fast” Phrases

PhraseMeaningCB Example
Hammer downDrive at full speed“Clean and green for 50 miles, hammer down”
Pedal to the metalAccelerator fully depressed“Had it pedal to the metal and barely made that grade”
Letting the hammer hangCruising at top governed speed“Just letting the hammer hang through Oklahoma”
Running like the windTraffic flowing freely at speed“Eastbound is running like the wind tonight”
Got it onUp to speed and rolling“Got it on and headed for the house”
Stepping on itAccelerating / going fast“That flatbed is really stepping on it”

“Slow Down” Phrases

PhraseMeaningCB Example
Back it downSlow down (urgent)“Back it down, bear trap at the 205”
Bringing it backReducing speed“Bringing it back through this work zone”
Backing offSlowing gradually“Backing off — roads getting icy”
Shut it downStop completely or slow way down“Shut it down, parking lot ahead”

Consequence Phrases

PhraseMeaningCB Example
Feeding the bearsGetting a ticket“Don't end up feeding the bears tonight”
Bear biteA ticket / citation“Got a bear bite at the 180, my own fault”
Taking picturesOfficer running radar“Bear taking pictures at the overpass”
Bear trapSpeed trap setup“Bear trap southbound between 180 and 185”

Phrases Evolve Over Time

CB radio slang is a living language. While core phrases like “hammer down” and “back it down” have been in use since the 1970s CB boom, new terms emerge and old ones fade. Regional variations also exist — truckers in the Southeast may use different speed phrases than those in the Pacific Northwest. The best way to stay current is to spend time listening on channel 19 in different parts of the country.

How to Use Speed Phrases Correctly

Knowing the phrases is one thing. Using them correctly on the air is another. Here are the rules of etiquette for speed-related CB communication:

  • Never broadcast specific speeds: Saying “I'm doing 78 in a 65” on an open radio frequency is foolish. Law enforcement monitors CB channels. Use slang: “got the hammer down” or “running with traffic.”
  • Use “back it down” with context: Always state why. “Back it down” alone tells drivers to slow down but not why. “Back it down, bear at the 142” or “back it down, debris in the road” is far more useful.
  • Keep speed warnings brief: The most effective speed warnings are 5-10 seconds. Direction + reason + location. That is all anyone needs. Do not ramble.
  • Acknowledge warnings: A quick “10-4, appreciate it” lets the warning driver know their message was received and encourages continued information sharing on the channel.

Real CB Conversations: Speed Phrases in Context

Here is how speed phrases sound in actual CB radio exchanges:

Bear Warning Exchange

“Eastbound drivers, back it down at the 142 — full-grown bear in the median taking pictures.”

“10-4, appreciate it driver. Was about to have the hammer down through there.”

Clear Road Update

“Anybody westbound got a road report?”

“Yeah driver, clean and green from the 200 to the 280. No bears, no brake lights. Hammer down.”

Weather Slowdown

“Northbound on 65, you're gonna want to bring it back around the 180. Fog is thick as pea soup and there's a couple four-wheelers in the ditch already.”

The Speed Phrase Every New Driver Should Master

If you learn only one speed phrase, make it “back it down.” This phrase saves CDLs, prevents accidents, and is the single most valuable warning you can give or receive on channel 19. When you hear it, slow down immediately and look for the reason. When you see a hazard, key up and use it. The trucking community runs on shared information, and speed warnings are the backbone of that system. For more on safe speed management, see our dedicated guide.

Speed Phrases and the Law

A common question: is it legal to warn other drivers about speed traps on CB radio? The answer is yes. Courts have consistently ruled that warning other drivers about police presence is protected speech under the First Amendment. This applies to CB radio, flashing headlights, and smartphone apps. The only exceptions are obstructing justice or helping someone actively evade arrest.

That said, broadcasting specific speeds you are traveling, especially if over the limit, is not protected and can be used as evidence. Stick to slang, keep your transmissions professional, and remember that anyone — including law enforcement — can listen to channel 19. For more on how speeding affects your CDL, see our CDL speeding consequences guide.

CB Speed Phrases FAQ

Common questions about hammer down and other CB radio speed phrases

What does 'hammer down' mean on CB radio?

Hammer down is a CB radio phrase meaning to drive at full speed or to accelerate. The term comes from the image of hammering the accelerator pedal down to the floor. It is one of the most iconic and widely recognized trucking CB phrases. On channel 19, you might hear 'hammer down' used as encouragement ('road's clear, hammer down'), a status update ('got the hammer down through Kansas'), or even a farewell ('alright driver, hammer down and be safe'). The related term 'hammer lane' refers to the left/fast lane.

What does 'feeding the bears' mean in trucking?

Feeding the bears means getting a traffic ticket — you are 'feeding' money to the police (bears). The phrase is used as both a warning and a description. As a warning: 'Don't end up feeding the bears tonight, back it down.' As a description: 'Saw a four-wheeler feeding the bears at the 205.' It is one of many bear-related CB terms. Bears are police, a bear bite is a ticket, a bear trap is a speed trap, and feeding the bears is the act of paying a fine.

What is the difference between 'hammer down' and 'pedal to the metal'?

Both phrases mean driving at full speed, but there is a subtle difference in usage. 'Hammer down' is the more common trucking-specific phrase and is used broadly — it can mean accelerating, cruising at top speed, or encouraging someone to go. 'Pedal to the metal' tends to describe the specific act of having the accelerator fully depressed, often when climbing a hill or trying to accelerate. On CB radio, 'hammer down' is heard far more frequently and is considered the standard trucker term.

What does 'back it down' mean and when should I use it?

Back it down means slow down and is one of the most important safety phrases on CB radio. Use it when you spot a speed trap ('back it down at the 142, bear in the median'), hazardous conditions ('back it down, ice on the bridge'), or any reason other drivers should reduce speed. When you hear 'back it down' on channel 19, treat it as an urgent advisory. The person transmitting is warning you about an immediate concern ahead. Always acknowledge with a quick '10-4' if possible.

Need a Dispatch Team That Keeps You Informed?

Our dispatchers provide real-time route intelligence so you always know what is ahead. Drive safe and drive smart with O Trucking.

Free consultation
No contracts required
Start earning immediately
24/7 support included