Lowboy Trailer Weight Capacity: How Much Can You Legally Haul?
The amount of weight a lowboy trailer can legally carry depends on the number of axles, the spacing between axle groups (bridge formula compliance), the gross vehicle weight limit in each state you travel through, and whether you have overweight permits. A standard 2-axle lowboy carries about 40,000 pounds. A 3-axle carries 60,000 pounds. Multi-axle configurations can handle 80,000 pounds or more. This guide covers the full weight picture.
40K lbs
2-Axle Payload
60K lbs
3-Axle Payload
80K+ lbs
Multi-Axle Payload
80K lbs
Federal GVW Limit
O Trucking Editorial Team
Trucking Industry Experts
Fact-Checked by O Trucking Dispatch Team
5+ years managing heavy haul loads, calculating weight distributions, and coordinating overweight permits across all 48 states
This article was written by the O Trucking editorial team with 9+ years of combined trucking industry experience. Learn more about us.
O TruckingLowboy Trailer Weight Capacity: How Much Can You Legally Haul? (2026)
Weight Capacity by Axle Configuration
The number of axles on your lowboy trailer is the primary determinant of how much weight it can legally carry. More axles distribute the load across more contact points with the road surface, which reduces stress on bridges and pavement. Federal and state law sets maximum weight per axle and per axle group.
| Configuration | Trailer Axle Capacity | Approx. Payload | Approx. GVW | Common Cargo |
|---|---|---|---|---|
| 2-Axle Lowboy | 34,000-40,000 lbs | ~40,000 lbs | ~80,000 lbs | Skid steers, mini excavators, small loaders |
| 3-Axle Lowboy | 51,000-60,000 lbs | ~60,000 lbs | ~100,000 lbs | Large excavators, D6-D8 bulldozers |
| 4-Axle Lowboy | 68,000-80,000 lbs | ~80,000 lbs | ~120,000 lbs | Crawler cranes, D10+ bulldozers |
| 5+ Axle (Perimeter) | 85,000-120,000+ lbs | 100,000+ lbs | 150,000+ lbs | Transformers, mining trucks, superloads |
These are approximate legal capacities. The exact payload depends on the specific trailer's tare weight, tractor weight, axle spacing (for bridge formula compliance), and the weight laws of each state on your route. Loads exceeding 80,000 pounds GVW always require overweight permits in every state.
Gross Vehicle Weight (GVW) Rules
The federal gross vehicle weight limit on the Interstate Highway System is 80,000 pounds. This means the combined weight of the tractor, trailer, and cargo cannot exceed 80,000 pounds without an overweight permit. Here is how a typical GVW calculation works:
Sample GVW Calculation (2-Axle Lowboy)
Federal axle weight limits also apply independently of GVW:
- Single axle — Maximum 20,000 lbs
- Tandem axle (2 axles) — Maximum 34,000 lbs
- Tridem axle (3 axles) — Maximum 42,000 to 51,000 lbs (varies by axle spacing)
- Steer axle — Maximum 12,000 to 14,000 lbs (varies by state and tire rating)
Every Axle Group Must Comply Individually
Bridge Formula: The Hidden Weight Limit
The Federal Bridge Formula (also called Formula B) is a mathematical formula that limits the weight on any group of consecutive axles based on the distance between the first and last axle in the group. Its purpose is to prevent excessive weight concentration that could damage bridges and road surfaces.
The formula is: W = 500 ((LN / (N-1)) + 12N + 36), where W is maximum weight in pounds, L is the distance in feet between the first and last axle of the group, and N is the number of axles in the group.
In practical terms, the bridge formula means that closely spaced axles cannot carry as much weight as widely spaced axles. This is why multi-axle lowboy trailers are longer — they need the extra length to spread axles far enough apart to comply with the bridge formula at their rated weight. If your axle spacing is too tight for the weight you are carrying, you are in violation even if your total GVW and individual axle weights are legal.
How to Calculate Your Available Payload
Follow these steps to determine exactly how much cargo your lowboy can legally carry:
Know Your Tractor Weight
Weigh your tractor at a certified scale with a full tank of fuel, all fluids, and any tools or equipment you carry. Typical day cab tractor: 16,000-19,000 lbs. Sleeper cab: 18,000-22,000 lbs.
Know Your Trailer Tare Weight
Get the actual empty weight of your specific trailer from a scale ticket, not the manufacturer's advertised weight. Include all securement equipment (chains, binders, straps, dunnage) that is always on the trailer.
Subtract from GVW Limit
Subtract tractor weight + trailer tare weight from the applicable GVW limit (80,000 lbs federal, or the permitted weight if you have an overweight permit). The result is your maximum payload.
Verify Axle Group Limits
After calculating total payload, verify that the equipment's position on the trailer distributes weight within each axle group's individual limit. Moving equipment forward or backward on the deck shifts weight between the steer axles, drive axles, and trailer axles.
When You Need Overweight Permits
You need overweight permits when your loaded vehicle exceeds 80,000 pounds gross vehicle weight or when any individual axle or axle group exceeds its limit. Overweight permits are issued by each state individually — a multi-state route requires permits from every state you travel through.
Overweight permit costs vary significantly by state and weight:
- 80,001-100,000 lbs GVW — $15 to $200 per state (single-trip permits)
- 100,001-120,000 lbs GVW — $50 to $500 per state
- 120,001-150,000 lbs GVW — $100 to $1,000+ per state (often requires route survey)
- Over 150,000 lbs GVW (superload) — $500 to $5,000+ per state, engineering analysis required
Overweight permits typically specify an exact route, travel times (often daytime only, no weekends or holidays), and may require escort vehicles. Deviating from the permitted route is a violation even if your weight is properly permitted.
Overweight Penalties
Getting caught overweight at a weigh station or during a DOT roadside inspection results in fines that escalate rapidly with the amount of excess weight:
| Overweight Amount | Typical Fine Range | Additional Consequences |
|---|---|---|
| 1-2,000 lbs over | $50-300 | Warning or citation, may proceed after fine |
| 2,001-5,000 lbs over | $300-1,500 | Citation, may be required to off-load excess weight |
| 5,001-10,000 lbs over | $1,500-5,000 | Must off-load, possible OOS (out-of-service) order |
| 10,000+ lbs over | $5,000-20,000+ | OOS, possible criminal charges, CDL points, insurance impact |
Overweight Violations Affect Your CSA Score
State Weight Limit Variations
While the federal GVW limit is 80,000 pounds on Interstate highways, individual states have authority to set their own limits on state highways and roads. Some examples:
- Michigan — Allows up to 164,000 lbs GVW on certain state highways with enough axles
- Texas — Allows 84,000 lbs on specific state-maintained highways
- Montana — Allows higher limits on specific routes with annual permits
- Most states — Follow the federal 80,000 lb limit on Interstate highways
Weight Distribution Tips
Proper weight distribution is as important as total weight. Here are key practices:
Center the load on the well — Position equipment so its center of gravity falls between the trailer's axle groups, distributing weight as evenly as possible between drive axles and trailer axles.
Slide the trailer tandems — If your lowboy has sliding tandems, adjust axle position to shift weight between the drive axles and trailer axles until both groups are within their limits.
Weigh before leaving the site — Scale your loaded vehicle at the nearest certified scale before hitting the road. Check steer, drive, and trailer axle weights individually, not just total GVW.
Account for fuel weight — Diesel weighs about 7 pounds per gallon. A full 150-gallon fuel tank adds 1,050 pounds to your steer and drive axles. Consider fueling after loading if axle weights are tight.
Know Your Trailer's Weight Before You Get to the Job Site
How Our Team Manages Weight Compliance
At O Trucking LLC, we verify equipment weight against trailer capacity and GVW limits before booking every heavy haul load. We calculate payload availability, check bridge formula compliance, and coordinate overweight permits when needed. Our carriers never leave the yard without knowing their load is legal. For more on lowboy specifications, see our lowboy trailer dimensions guide and lowboy trailer glossary page.
Continue Reading
Need a Dispatch Team That Gets Weight Right?
Our dispatchers calculate weight distribution, verify GVW compliance, and coordinate overweight permits for every heavy haul load. No surprises at the scale.