Lowboy vs RGN Trailer: Key Differences for Heavy Haulers
The term “lowboy” technically covers both fixed gooseneck (FGN) and removable gooseneck (RGN) trailers — an RGN is a type of lowboy. But in practice, when haulers say “lowboy” they usually mean a fixed gooseneck model, and “RGN” refers specifically to the removable gooseneck version. The difference comes down to how equipment is loaded, how much deck space you get, and what it costs to buy and operate each type.
24-29 ft
FGN Well Length
29-53 ft
RGN Well Length
$45-75K
FGN Used Price
$65-120K
RGN Used Price
O Trucking Editorial Team
Trucking Industry Experts
Fact-Checked by O Trucking Dispatch Team
5+ years dispatching lowboy and RGN loads, coordinating equipment transport, and managing heavy haul logistics
This article was written by the O Trucking editorial team with 9+ years of combined trucking industry experience. Learn more about us.
O TruckingLowboy vs RGN Trailer: Key Differences for Heavy Haulers (2026)
Side-by-Side Comparison: FGN Lowboy vs RGN
| Feature | FGN (Fixed Gooseneck) | RGN (Removable Gooseneck) |
|---|---|---|
| Gooseneck | Permanently attached | Detachable (hydraulic or mechanical) |
| Loading Method | Crane or rear ramps | Front drive-on, crane, or ramps |
| Well Length | 24-29 ft | 29-53 ft |
| Deck Height | 18-24" | 18-24" |
| Tare Weight | 15,000-20,000 lbs | 18,000-26,000 lbs |
| Used Purchase Price | $45,000-75,000 | $65,000-120,000 |
| Maintenance Cost | Lower (fewer moving parts) | Higher (hydraulics, detach mechanism) |
| Loading Time | 30-60+ min (with crane) | 20-45 min (drive-on) |
| Versatility | Limited (needs crane access) | High (loads anywhere) |
Loading Method: The Biggest Practical Difference
The primary reason to choose an RGN over an FGN is the loading method. An RGN's detachable gooseneck allows the front of the trailer to drop to ground level, creating a gradual ramp that equipment can drive directly onto. This eliminates the need for a crane at the loading site — a significant advantage when picking up equipment at construction sites, farms, or remote locations where crane access is limited or unavailable.
An FGN lowboy requires either a crane to lift equipment onto the deck from the side or ramps placed at the rear of the trailer. Crane loading works well for non-mobile equipment (transformers, generators, industrial machinery) and at facilities with permanent crane access. But it adds cost ($500 to $3,000+ per crane rental) and time (1 to 2 hours for crane setup, lifting, and breakdown).
For a step-by-step guide to loading both trailer types, see our how to load a lowboy trailer guide.
RGN Pays for Itself in Crane Savings
Well Length & Usable Deck Space
RGN trailers offer significantly more usable deck space than FGN models. A standard FGN lowboy provides 24 to 29 feet of well length. A standard RGN provides 29 to 35 feet, and extended (stretch) RGN models can offer up to 53 feet of well length.
The extra deck space on an RGN comes from two factors: the gooseneck section is designed to consume less overall length when attached, and many RGN models use a front-loading design that positions the well further forward. This gives you 5 to 24 more feet of usable deck — a meaningful difference when hauling long equipment or multiple pieces on a single trailer.
For detailed dimension comparisons, see our lowboy trailer dimensions guide.
Weight & Payload Differences
RGN trailers are heavier than FGN trailers — typically 3,000 to 6,000 pounds heavier — due to the hydraulic cylinders, connection hardware, and reinforced gooseneck structure. This extra tare weight directly reduces your available payload within the 80,000-pound GVW limit.
For example: with an 18,000-pound tractor, an FGN lowboy at 17,000 pounds leaves 45,000 pounds for cargo. An RGN at 22,000 pounds leaves only 40,000 pounds. That 5,000-pound difference matters when hauling equipment near the weight limit. For loads that need every pound of capacity, the lighter FGN may be the better choice — if crane access is available. See our weight capacity guide for detailed calculations.
Purchase & Operating Cost Comparison
The RGN's additional capabilities come at a higher price — both upfront and ongoing:
| Cost Category | FGN Lowboy | RGN Lowboy |
|---|---|---|
| New Purchase Price | $75,000-120,000 | $110,000-200,000+ |
| Used Purchase Price | $45,000-75,000 | $65,000-120,000 |
| Annual Maintenance | $2,000-4,000 | $4,000-8,000 |
| Crane Costs (if needed) | $500-3,000 per load | Usually $0 (drive-on) |
| Insurance Premium | Lower (less equipment value) | Higher (more equipment value) |
Total Cost of Ownership Favors RGN for High-Volume Operations
Maintenance Considerations
FGN lowboys are mechanically simpler and require less maintenance. The gooseneck is welded permanently, so there are no hydraulic seals to replace, no detach pins to wear out, and no hydraulic fluid to monitor. Standard maintenance is limited to tires, brakes, bearings, lights, and structural inspections.
RGN lowboys have additional maintenance requirements:
- Hydraulic system — Cylinders, hoses, seals, and fluid require regular inspection and replacement. A hydraulic failure during loading can strand equipment and delay the job.
- Detach mechanism — Connection pins, latches, and alignment hardware wear over time and must be inspected for cracks, deformation, and proper fit.
- Electrical connections — The detachable gooseneck has electrical connectors for lights and ABS that can corrode or fail from repeated connection/disconnection cycles.
- Gooseneck landing gear — RGN goosenecks have their own landing legs that support the gooseneck when detached. These require greasing, inspection, and occasional replacement.
Budget $4,000 to $8,000 per year for RGN-specific maintenance, compared to $2,000 to $4,000 for a comparable FGN. A major hydraulic cylinder rebuild can cost $2,000 to $5,000. Keeping the hydraulic system properly maintained prevents costly mid-load failures.
When to Choose an FGN Lowboy
You always have crane access — If every pickup and delivery location has a crane available, the FGN's lower cost and simpler maintenance make it the better financial choice.
You haul non-mobile equipment — Transformers, generators, and industrial machinery cannot drive onto a trailer regardless of gooseneck type. The crane is required anyway, so the FGN's simpler design saves money.
You need maximum payload capacity — The FGN's lighter tare weight gives you 3,000 to 6,000 more pounds of payload capacity — critical for loads near the GVW limit.
Budget is a primary concern — The FGN costs $20,000 to $45,000 less to purchase and $2,000 to $4,000 less per year to maintain. For low-volume operations, the savings add up.
When to Choose an RGN Lowboy
You haul self-propelled equipment — Excavators, bulldozers, wheel loaders, and other equipment that can drive under its own power load fastest via RGN drive-on. No crane needed.
You load at remote or unimproved sites — Construction sites, farms, and pipeline jobs rarely have crane access. The RGN loads anywhere with level ground.
You need longer deck space — RGN well lengths of 29 to 53 feet accommodate longer equipment that will not fit on a 24 to 29 foot FGN well.
Loading speed matters — RGN drive-on loading takes 20 to 45 minutes vs 30 to 90 minutes for FGN crane loading. Over hundreds of loads per year, that time savings is significant.
You want maximum versatility — An RGN can do everything an FGN can do (crane loading from the side is still an option) plus drive-on loading. It is the more versatile choice.
Most Heavy Haul Carriers Choose RGN
How Our Team Matches Trailers to Loads
At O Trucking LLC, we consider the gooseneck type when matching carriers to heavy haul loads. If a load requires crane loading at both ends, we can dispatch an FGN carrier and save the shipper money. If the pickup site has no crane access and the equipment is self-propelled, we dispatch an RGN carrier. Matching the right trailer type to each load optimizes cost, loading time, and safety.
For the full lowboy reference, see our lowboy trailer glossary page.
Need a Carrier with the Right Lowboy for Your Load?
Our dispatch team matches your equipment to carriers with the right trailer type — FGN or RGN — based on load requirements, site conditions, and route logistics.